Internet SPECIAL!

Low Cost IP Camera netCAMit I
Low Cost IP Camera netCAMit I
Item# Low-Cost-IP-Camera-netCAMit-I
Regular price: $49.00
Sale price: $39.00

Product Description


netCAMit is a color network camera with built-in Plug & Play function by 3JTech.Just plug netCAMit directly to a RJ45 Ethernet port of your router as well as install the software, and you will be able to view camera sites in real time from anywhere in the world.

netCAMit supports wireless RFIO to connect with wireless RF Sensor to trigger camera as security alarm. netCAMit camera can send the triggered event by means of SMS, MMS and/or e-mail via RCS system to authorized users. It can also record triggered images to RCS system at the same time.

Comparison List of Plug & Play IP Cameras with Most of the Conventional Ones
To view the IP Camera connected to a Non-Fixed IP from Intern
Apply for Dynamic Domain Name Service (DDNS)
Search via Unique ID
Router Setup Need Setup Auto
Multiple Cameras using Router Setup DDNS and Router for each Camera Auto
Maximum Cameras Viewed on a Screen Varies 16
Arm/ Disarm by Schedule NA Daily or Weekly (Optional Accessory Package Needed)
Arm/ Disarm by Key Flop NA Daily or Weekly (Optional Accessory Package Needed)
Trigger-in from Sensors Wires Wired or Wireless (Optional Accessory Package Needed)
Maximum Trigger-in IO per Camera Varies 4 by RF, 1 by wire (Optional Accessory Package Needed)
Control AC Appliance through Camera Remotely NA Yes (Optional Accessory Package Needed)
Recording upon Triggered or Scheduled NA To local PC or Remote PC with Fixed IP
Mounting Method Varies Desktop, Ceiling and Wall Mounts;



Application of netCAMit with wifiRouter and wifiAdaptor:



Retail Box for netCAMit:

Physical Specification:

  1. DC 5V 420mA
  2. Housing dimension: 1 11/16 x 2 1/16 x 3 3/4 inches. (Without holder)
  3. Holder dimension: 2 3/8 x 2 3/16 x 1 5/8 inches
  4. Weight: 3.5 ounces. (Without the stand)

Lens Specification:

  1. Default lens: (others are available as optional Lens.)
  2. Focal length: 3.6mm
  3. Aperture: F2.0
  4. Angle of view (DIA): ~60o

Image Sensor Specification:

  1. 1/5 " CMOS sensor (OV 7660)
  2. VGA, QVGA, QCIF pixel size
  3. Max. frame rate: 15 fps progressive
  4. Dynamic range: 72dB
  5. Sensitivity: 1.0 V/LUX-Sec

Connectors:

  1. RJ45 (10/100M)
  2. RJ22 for DC5V and one each for trigger-in and trigger-out

* If you don't have a router, you can

  1. Setup the camera using PPPoE or Static IP,Or
  2. Get a new router and setup its WAN connection.

Optional Security Setup with Purchase of Additional Accessories:

    1. Wired or Wireless Triggering
    2. Weekly or Daily Schedule for Arm and Disarm
    3. RFIO and RF Sensor with Two Way Confirmation
    4. Over 10 Yrs Battery Life for RFSensor under Optimized Usage

Retail Box for Security Accessories for netCAMit:

Optional Security Accessories:
RF Sensor
  • Built-in 3.6V/2100mAH battery
  • Trigger input contact for alarm sensor from wired to wireless
  • LED status indication
  • ON/OFF switch
  • Working frequency: 433 Mhz.
    ( programmable 315Mhz, 868Mhz and 915 Mhz)
  • Power consumption: TX: 28.8 mA at +10 dBm output
    power RX:15.6 mA
  • High sensitivity (-110 dBm at 1.2 kbps)

RF Flip
  • Built-in 3V/200mAH battery
  • Enable RFIO function button
  • Disable RFIO function button
  • LED status indication
  • Working frequency: 433 Mhz
    ( programmable 315Mhz, 868Mhz and 915 Mhz)
  • Power consumption: TX: 28.8 mA at +10 dBm output power RX: 15.6 mA
  • High sensitivity (-110 dBm at 1.2 kbps)

RFIO
  • Working frequency: 433 Mhz
    ( programmable 315Mhz,868Mhz and 915 Mhz)
  • Power consumption: TX: 28.8 mA at +10 dBm output power RX:15.6 mA
  • High sensitivity (-110 dBm at 1.2 kbps)


Related information
Quick Installation Guide View
User's Guide View

*Specifications are subject to change without notice