Video Server for PTZ -veCAMit Tx1

veCAMit T x1 is a single channel video gateway. It turns CCTV cameras into IP cameras using dynamic IP with features similar to our T series IP cameras. It provides 48 zone motion detection and external trigger in. When the camera is triggered, it will send e-mail with JPEG attachments to you. It also provides the Internet accessibility for your local CCTV camera, by connecting it to the Ethernet port of the network switch or router. You could access the camera to turn on/off your appliances through the video gateway from anywhere in the world with Internet connection using your PC, Pocket PC, Smartphone or MIPD2.0 Mobile phone.

veCAMit T x1 supports RS485 to control PTZ speedy dome cameras and can convert regular CCTV cameras into IP cameras. User also can use RJ22 daisy chain connection to our powerBox and veCAMit Tx1 to turn on/off the AC devices remotely via internet.

General Features:
The camera uses our proprietary worldwide free IP gatekeeper for dynamic IP to make the cameras plug and play. There would be no setup needed between the router and the cameras. They are specially designed for managing and marketing your business and could also be scheduled to enter into security mode or activate remotely by mobile devices. The general features are:

• 48 zone selectable motion detection
• Built-in real time clock for scheduling security mode and recording
• Plug and Play for multiple cameras using dynamic IP
• Encrypted data
• View from PC, Pocket PC, Smartphone and Java phone
• Send e-mail upon motion detection or optional external trigger, e.g.: contact sensor

Special Feature for veCAMit T x1:

• One trigger-in and one trigger-out
• Daisy chain connection to powerBox for turn on/off the AC power
• Optional version to control the speedy dome

Application of veCAMit Tx1 with wifiAdaptor:

Application Software:

• Use a PC with Windows application software or Internet Explorer to view the cameras peer to peer without the data going through a server.
• Use eCAMit T Java Midlet for the MIDP2.0 Java phones to view, activate, deactivate the camera peer to peer without the data going through a server.
• Use eCAMit T AP for Pocket PC to view the cameras peer to peer without the data going through a server.
• Windows application software ( eCAMit Deluxe AP ) features
  - Schedule security mode daily or weekly
  - Schedule auto-recording daily or weekly
  - Snapshot
  - Replay recorded images
  - Up to 16 cameras display on windows_based application software

Specifications of veCAMit T x1:

• Power Consumption: 5V DC, ~270mA
• Connectors:
  - MiniDIN9 for optional RS485 to control speedy dome PTZ
  - RJ45 for Ethernet 10BaseT
  - RJ22 connector for 5V DC/90~240V AC adaptor and trigger in/out
  - BNC Video Out
  - AV Video In
  
• Trigger In: NO or NC (Software Selectable) or 5V level trigger
• Motion Detection Sensitivity: High, Medium and Low
• Motion Detection Zones: 48
• Trigger Out: Low to High TTL Level 5V
• Internet Protocol for IP Connection: UDP
• Trigger Out: Low to High TTL Level 5V
• Internet Protocol for IP Connection: UDP UDP Port Used: any plus the last field of the IP (firewall, if any, has to allow these ports to go through)
• Transmission Speed:
  - High Resolution (640x480): maximum 6 frames/second
  - Medium Resolution (320x240): maximum 15 frames/second
  - Low Resolution (160x120): maximum 25 frames/second
  
• Video In: NTSC or PAL
• Operation Environment:
  - Temperature: 0^oC~55^oC
  - Humidity: 85% relative at 25^oC
  
• Weight: ~150g
• Dimension of Main Body: 18cm x 11cm x 3 cm
  
  *Specifications are subject to change without notice